Home | WRX/STi/XT/GT/Baja Turbo | Impreza 2.5 | Legacy/Forester/Baja | Specials | Gallery | Contact Us | Order Form
 

2011+ WRX Turbo Performance Stage3 Kit

(Approximately 406 H.P.) WRX 265hp base. Please note, all power outputs stated are only approximations, for reference purposes and will vary depending on each vehicle, its condition, fuel and modifications.

Turn your WRX into an 'Rocket'!

Kit Contains:

  1. Short Ram Intake: This Performance Intake System is designed specifically for each vehicle with mass airflow (MAF) sensor adapters sized and positioned perfectly to allow properly metered air to enter your engine without risk of Check Engine Lights. You will see consistent gains in horsepower, throttle response and fuel economy.
  2. Turbo-Back Exhaust System with Cat, with one or two mufflers, depending on model.
  3. Electric Cutout: This kit is designed to better your cars performance and feel. The cutout works by welding into your stock or modified exhaust. They can be placed anywhere after the headers. To open the cutout you press a switch, which opens cutout, releasing your exhaust. This enables you to bypass your muffler, increasing horsepower and giving your car an extremely throaty rumble.
  4. Large Front Mount Intercooler: The bar and plate intercooler core is designed to provide maximum cooling efficiency. The end tanks are aluminum and precision welded to the thick racing upgraded cores.
  5. Custom 4 into 1 Stainless Steel Header: Designed to significantly gain horsepower and torque.
    SPECIAL NOTE: THE STAGE3 WRX KIT REQUIRES CUSTOM TUNING OF THE CHIP TO ACCOMPLISH FULL BENEFITS OF THE PERFORMANCE STi HEADS AND CAMS. TO ACCOMPLISH THIS, WE MUST HAVE YOUR CAR TO TUNE IT. WE PROVIDE COMPLETE INSTALLATION AND TUNING ALSO, WHICH WILL TAKE ABOUT 5-7 DAYS OF WORK. PLEASE CONTACT US FOR DETAILS ABOUT TUNING THE CHIP AND/OR INSTALLATION. WE DO NOT RECOMMEND RUNNING OVER 18PSI WITHOUT A BUILT BLOCK.

    All power outputs stated are only approximations, for reference purposes only and will vary depending on each vehicle, its condition, fuel, modifications and tuning. All engine modification components, except those that are exempt, have been designed and are intended for off-highway application. These components are for racing vehicles only, which may never be used on public roads and highways. Federal and many state laws prohibit the removal, modification, or rendering inoperable of any device or element of design affecting vehicle emission or safety in a vehicle used on public highways. Violation of such laws may subject the owner or user to a fine or penalty. Installation of this part may void the warranty coverage, if any, on your vehicle. Vehicles modified by the use of performance parts may no longer be lawfully used on public highways. User assumes all cost and risks associated with these items.


ECU Upgrade


High Flow Short Ram Air Intake


 

 
 
Large Front Mount Intercooler
 
 
 
Custom 4 into 1 Stainless Steel Header
 



Downpipe with Super High Flow Cat

Stainless Catback Exhaust


ELECTRIC CUTOUT VALVE

Electric Exhaust Cutout Kit includes 'Y' pipe, electric valve and switch. Adds 15hp when open!

This kit is designed to better your cars performance and feel. The cutout works by welding into your stock or modified exhaust. They can be placed anywhere after the headers. To open the cutout you press a switch, which opens cutout, releasing your exhaust. This enables you to bypass your muffler, increasing horsepower and giving your car an extremely throaty rumble.

Hear Mild to Wild



NOTE: Under Federal EPA regulation, replacement of original catalytic converters is allowed only if the original converter(s) is missing, or the vehicle has more than 50,000 miles or is at least five years old and the need for a replacement has been established and documented, or a local inspection program has determined the existing converter is in need of replacement. Please note that no aftermarket catalytic converters are legal for installation in California on OBD II vehicles (some 1994 & 1995, and all 1996 and later vehicles). There is a chance of seeing a CE Light: Inefficient cat code when running less than two cats, so if seen, contact us for the mechanical fix (sold separately). All performance parts have been designed and are intended for off highway application only. Installation of these parts on a vehicle intended for use on public roads may violate state or federal laws and regulations including those relating to emissions requirements and motor vehicle safety standards.



   

2011+ WRX Stage 3

$5950.00 + shipping Order Now!

**Note: Please replace the following OEM gaskets when installing the kit: header, uppipe and turbo gaskets. Xcceleration.com highly recommends you install a boost gauge, exhaust gas temperature (EGT) gauge, and air/fuel gauge to monitor your car and ensure safe, reliable performance. Gauges are sold separately



Home | WRX/STi/XT/GT/Baja Turbo | Impreza 2.5 | Legacy/Forester/Baja | Specials | Gallery | Contact Us | Order Form