The Perfect Solution to a Powerful
Engine Management System
BLUE-FIRE DUAL CHANNEL IGNITION APLIFIER
The Blue-Fire Dual
Channel Ignition Amplifier from Perfect Power is a powerful,
microprocessor controlled ignition amplifier with an updated exterior.
The continuous current
rating is an amazing 30 amps per channel at 25 deg C. The Blue-Fire
Dual Channel Ignition Amplifier is specifically designed to cater for
the extreme demands by high current coils in performance applications.
For the ultimate in
protection, the Blue-Fire comes totally encapsulated, preventing
ingress of water spray, oil and the like.
The Blue-Fire
Dual Channel Ignition Amplifier from Perfect Power is a powerful,
microprocessor controlled ignition amplifier with an updated exterior.
The continuous
current rating is an amazing 25 amps per channel at 25 deg C. The
Blue-Fire Dual Channel Ignition Amplifier is specifically designed to
cater for the extreme demands by high current coils in performance
applications.
For the
ultimate in protection, the Blue-Fire comes totally encapsulated,
preventing ingress of water spray, oil and the like.
The
Blue-Fire's improved housing includes 6 pre-cut grooves allowing for
ease of mounting. Its lightweight aluminium body also serves as a heat
sink to dissipate heat losses during peak demands.
The power
connections consist of solid, plated brass terminals, using lugs with 4
mm screws to achieve quality contacts. The supplied crimp lugs make
termination an easy task. The Blue-Fire is designed to be installed in
the engine bay, keeping power cable length to a minimum.
FEATURES OF THE BLUE-FIRE
Lightweight
Small size
Easy to mount
Extremely rugged
Processor controlled
2 channels in one unit
Over current protection
Reverse polarity protection
Built-in temperature cut-out
Bright LED’s to monitor functions
Inputs and outputs can be paralleled to
double the power
Can be used with 24 V battery systems
Ideal for high revving or high boost
turbo/compressor engines
Pin-out for Blue-Fire Dual Channel
SPECIFICATIONS
OF THE BLUE-FIRE
| Supply voltage range |
9 to 28 VDC |
|
Current demand from battery |
typically below 20 mA |
| Input voltage to
trigger |
above 1.0 V to 1.5 V (above 5 V
recommended) |
| Input /output relationship |
A positive input voltage will
turn the power switch on. |
| Max switching current |
25 amps continuous per channel
at 25 deg C. |
|
20 amps continuous per channel
at 80 deg C. |
| Protection |
|
| Supply voltage polarity reversal |
Yes |
| Output terminal polarity reversal |
Yes |
| Max output current |
Self limiting, temperature
dependant |
| Overload |
Yes, magnitude and time
depending will eventually bring up over temperature |
| Short circuit protection |
Yes, pulse by pulse monitoring
with instant shutdown |
| Operating temperature range |
above 80 deg C , cutout with
auto-reset function once temperature has dropped to below 80 deg C |
| Indications |
|
| Input signal present |
Yes, one green LED per channel |
| Output overloaded / shorted |
Yes,
one red LED per channel |
| Over temperature |
Yes, both red LED’s flashing |
| System fault |
Yes, both red LED’s on
continuously |
$350.00 USD plus shipping
Back to Peripheral Products
Back to Main Products Page
