300 H.P.) Please note, all
power outputs stated are only approximations, for reference purposes
and will vary depending on each vehicle, its condition, fuel and
Turn your mild mannered performer into a 'Real Truck'!
ECU: SMT is ideal
for optimizing and fine-tuning performance products such as; Exhaust,
Air Intake, Intercoolers, Boost Controllers and Turbo upgrades. All
installation and tuning should only be made by a trained technician
with proper air/fuel monitoring tools.
Manual Boost Controller
Short Ram Intake: Using the same design feature of the
velocity stack found on the inlet to the MAF sensor in the factory box
this cast aluminum intake carries the velocity stack radius outward to
mate up with a 4.5" high flow cone filter.
4 into 1 Header and Custom Uppipe Combo: Designed to significantly gain
horsepower and torque.
Downpipe with Cat: Downpipe
is a full 3" catted downpipe made from 304 stainless steel. The
bellmouth design allows for maximum flow for your Subaru with many mods
and / or an aftermarket turbo. The built in high flow catalytic
converter keeps it legal while still being efficient.
Manual Boost Contoller
Custom 4 into 1
Stainless Steel Header and Uppipe
Downpipe with Cat
Under Federal EPA regulation, replacement of original catalytic
converters is allowed only if the original converter(s) is missing, or
the vehicle has more than 50,000 miles or is at least five years old
and the need for a replacement has been established and documented, or
a local inspection program has determined the existing converter is in
need of replacement. Please note that no aftermarket catalytic
converters are legal for installation in California on OBD II vehicles
(some 1994 & 1995, and all 1996 and later vehicles). There
is a chance of seeing a CE Light: Inefficient cat code when running
less than two cats, so if seen, contact us for the mechanical fix (sold
separately). All performance parts have been designed and are intended
for off highway application only. Installation of these parts on a
vehicle intended for use on public roads may violate state or federal
laws and regulations including those relating to emissions requirements
and motor vehicle safety standards.
Please replace the following OEM gaskets when
installing the kit: header, uppipe and turbo gaskets. Xcceleration.com
highly recommends you install a boost gauge, exhaust gas temperature
(EGT) gauge, and air/fuel
gauge to monitor your car and ensure safe, reliable performance. Gauges are sold separately