WRX Stage 2 (Approximately
320 H.P. - includes Stage 1) Please note, all
power outputs stated are only approximations, for reference purposes
and will vary depending on each vehicle, its condition, fuel and
modifications.
**Turbo Stage 2 - Chip Kit Contains:
- AccessPort
ECU Upgrade: The
Accessport is a mult-featured ECU reprogramming device for your Subaru
WRX or STi. The Accessport comes loaded with multiple maps for various
setups (i.e. stock, turboback exhaust, etc.). It also allows for custom
tuning through Tuners or self-tuning by downloading Cobb's Racer Tuner
program. Your Subaru can easily be returned to stock at any time, as
the Accessport retains your stock base map. In addition, the Accesport
functions as a scan tool, diagnosing and clearing check engine lights
(CELs) and other vehicle parameters. The Accessport's color display
allows the user to display a variety of parameters including
dynamometer testing and real time data.
- FREE MOD:
Remove the stock
resonator chamber in the passenger side front wheel well
- Short Ram Intake: Using the same design feature of the
velocity stack found on the inlet to the MAF sensor in the factory box
this cast aluminum intake carries the velocity stack radius outward to
mate up with a 4.5" high flow cone filter.
- Custom 4 into 1 Stainless Steel Header and Uppipe
Combo: Designed to
significantly gain horsepower and torque.
- Turbo-Back
Exhaust System with Cat

ECU Upgrade
|

Short Ram
|

Remove This
|
Custom
4 into 1 Stainless Steel Header and Uppipe
|

Downpipe with
Super High Flow Cat
|
Mellow Cat-Back
|
NOTE:
Under Federal EPA regulation, replacement of original catalytic
converters is allowed only if the original converter(s) is missing, or
the vehicle has more than 50,000 miles or is at least five years old
and the need for a replacement has been established and documented, or
a local inspection program has determined the existing converter is in
need of replacement. Please note that no aftermarket catalytic
converters are legal for installation in California on OBD II vehicles
(some 1994 & 1995, and all 1996 and later vehicles). There
is a chance of seeing a CE Light: Inefficient cat code when running
less than two cats, so if seen, contact us for the mechanical fix (sold
separately). All performance parts have been designed and are intended
for off highway application only. Installation of these parts on a
vehicle intended for use on public roads may violate state or federal
laws and regulations including those relating to emissions requirements
and motor vehicle safety standards.
|
|
'02+ WRX Stage
2 - Chip Kit, complete |
$3400.00 +
shipping |
Order Now! |
|
**Note:
Xcceleration.com highly recommends you install a boost gauge,
exhaust gas temperature (EGT) gauge, air/fuel gauge and a knock sensor
to monitor your car and ensure safe, reliable performance. Gauges are sold separately - Please
appreciate, we just think that if you spent ~$25k+ on a high
performance car like the WRX and even more $ to make it perform even
better, you should seriously consider spending a few hundred $
additional to monitor some key parameters!
|
|