- BAJA
ENHANCEMENTS: Many of the Legacy Upgrades will
fit the New Baja. Please give us a call with your questions.
Borla
Header 2.5 liter
(Stainless steel) |
The
stock Subaru headers are extremely restrictive and clearly built
to save costs, not make power. To remedy this design flaw, we
offer the Borla Stainless steel headers. These headers feature
nice, smooth mandrel bends with a much more effective layout which
improves mid and high RPM torque and power. Not only do you gain
performance but you also get the 'boxer' sound the Subarus are
famous for.
$499.99
|
|
|
Xcceleration
Stainless
Steel Super Hi-Flow Performance Muffler is a work of ART and adds
10HP!
|
Your
car will truly become alive by just replacing your restrictive
Muffler with the newest technology in Super Hi-Flow Performance
Mufflers. Air flow is increased dramatically, which will greatly
increase your HP and Performance. This is a direct bolt on, couldn't
be easier. Has a 4" tip.
It
also will increase your Performance by about 10HP and remove many
pounds of UGLYNESS!
This
is a direct bolt on
NON-TURBO
2.5''
Axle Back Performance Muffler for Baja - $599.99
2.5''
Cat Back Performance Muffler for Baja - $799.99
includes:
nuts, bolts and gaskets
|
|
Xcceleration
Turbo-back
Exhaust System with Super Hi-Flow Cats for
BAJA TURBO
Xcceleration/Random Tech.
SYSTEM FEATURES 3" PIPING, STAINLESS CONSTRUCTION
LIMITED
TIME
SPECIAL
PRICING
|
TRUE
3" PIPE for
your BAJA TURBO w/ 3.5'' Tip
Our
Turbo-back Exhaust System features the newest technology in Super
Hi-Flow Catalytic Converters and Exhaust Piping. Air
flow is increased dramatically to greatly increase your HP and Performance.
Our
Super Hi-Flow Uppipe with Cat uses the newest technology also, and
is only 4"x5" in size. This means
less resistance, less heat build up, more air flow and maximum HP!
It
couldn't be easier!
The
whole Turbo-back Exhaust System is a constant 3" pipe size,
which retains low end torque and produces high air flow capacity.
Our 3" diameter Super High Flow cats flows 613 cfm, while most
3" diameter high performance cats flow less than 450 cfm at
the same test pressure. Remember: Increasing
exhaust flow reduces backpressure. Backpressure forces exhaust gases
back into the combustion chamber and contaminates the next burn
cycle. Reduced backpressure increases exhaust scavenging from the
combustion chamber giving you a cleaner, more efficient burn. The
increased momentum of the exhaust pulls more air/fuel into the cylinders,
hence increasing low end torque. This
is what your Baja needs!
Also
consider: changes in pipe diameter
creates air turbulence which slows down air flow, reducing maximum
HP and Torque! The Super Hi-Flow Cats are the newest Hi-Tech Metallic
Bricks from Random Tech. and are only 4"x6" in size. This
means less resistance, more Air Flow
and more POWER.
The
combination of this newest technology and special 3" case construction
makes for MAXIMUM AIR
FLOW, MAXIMUM
TORQUE
and MAXIMUM HORSEPOWER.
3''
Baja Turbo Back Exhaust System with 3.5'' tip
$1699.99
includes:
Downpipe w/Cat, midpipe
w/Cat and catback exhaust
3''
Baja Cat Back Exhaust System with 3.5'' tip
$929.99
Gasket
Kit is included:
nuts, bolts and gaskets.
All
Exhaust components feature a 5 year manufacturing quality warranty!
See
Install
NOTE:
Under Federal
EPA regulation, replacement of original catalytic converters is
allowed only if the original converter(s) is missing, or the vehicle
has more than 50,000 miles or is at least five years old and the
need for a replacement has been established and documented, or a
local inspection program has determined the existing converter is
in need of replacement. The Xcceleration Cat is producted by Random
Tech., a leader in exhaust/cat manufacturing. Please note that no
aftermarket catalytic converters are legal for installation in California
on OBD II vehicles (some 1994 & 1995, and all 1996 and later
vehicles)
|
|
Super
Hi-Flow Catalytic Converter for 2.5L
Xcceleration/Random's
Stainless Steel Super Hi-Flow Catalytic Converter is a work
of ART!
It
also will increase your Performance by about 10HP and remove
many pounds of UGLYNESS!
Your car
will truly become alive by just replacing your tired, old
and restrictive Cat with the newest technology in Super Hi-Flow
Catalytic Converters. Air flow is increased dramatically,
so even if you do not have a performance exhaust system, this
Cat will greatly increase your HP and Performance. This is
a direct bolt on, couldn't be easier. With
a performance exhaust system, (headers and cat-back) things
really begin to come alive!!
The Hi-Flow
Cat will increase your exhaust sound dramatically also.
NOTE:
Under
Federal EPA regulation, replacement of original catalytic
converters is allowed only if the original converter(s) is
missing, or the vehicle has more than 50,000 miles or is at
least five years old and the need for a replacement has been
established and documented, or a local inspection program
has determined the existing converter is in need of replacement.
The Xcceleration Cat is producted by Random Tech., a leader
in exhaust/cat manufacturing. Please note that no aftermarket
catalytic converters are legal for installation in California
on OBD II vehicles (some 1994 & 1995, and all 1996 and
later vehicles).
RS/TS
(1999-newer) $559.99 Cat Only.
Will
fit other 2.5L applications, please contact us for details.
|
PERFORMANCE ENGINE UPGRADES
Cams, Heads, Turbo Kits
|
|
|
|
SWAY
BAR PRICES
|
19, 20, 22 mm adjustable - Rear Only $229.99
|
|
|
CUSCO
FRONT STRUT TOWER BRACE BAR
Legacy
- Baja
|
$219.99
|
|
Racing Subaru Baja 05+ Coilovers
Lowering
your Baja! |
If you want adjustability, here it is!
32 Levels of Adjustment
Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 Levels of damper force adjustment, full-height adjustment, these damper kits are then perfectly matched with front and rear Pillow Ball upper mounts for camber correction in most applications.
The adjustment of the damper is as simple as can be with a built-in knob at the top of the damper mount for easy access. Simple adjustments can be made to tune to your style of driving and comfort level desired. Single-Adjustable dampers make suspension adjustments easy to tune whether you’re a professional mechanic or an automotive enthusiast with amateur mechanical skills.
The height adjustment is made easy with CNC-Machined locking perches for accuracy and smooth adjustment. You can raise your car up to factory height for OEM appearance with performance handling or you can drop your car all the way down for a formal racetrack and an aggressive stance lowering your center of gravity to gain full potential of your car’s handling capabilities.
On most applications, the Racing Damper Kits come with fully adjustable Pillow-Ball upper mounts to easily tune and adjust your camber. Adjustable camber gives you an edge on most suspension setups, as you can easily tune your car for any ride height which improves handling, predictability and furthermore tire wear, which is a great benefit both on the racetrack and on the street.
Note: When installing coilovers, do not pre-load the spring. Let the spring hang without compression to allow the most travel on compression. To adjust damper, turn adjustment to left for soft and right for hard.
Features:
- 32 Levels of Adjustable Damper
- Pillow Ball Upper Mounts.
- Rubber Dust Covers.
- Adjustable Ride Height
- Aggressive Spring Rates
- Single-Cylinder Design
- Aluminum Brackets
- All Hardware is Included
32 Levels of Adjustment:
1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.
$1499.99 per set, plus shipping |
|
